6970:Please use the Separation Setup command to choose the Use Page Setup option in the Paper Size pop-up menu in order to print separations using this printer driver.
-9999:Canvas documents are limited to 32760 objects, and you have reached this limit in this document. Split the document into two or more smaller ones.
-3002:The painting you are attempting to edit is not an 8 bit image.
-112;-111;-109;-3001:The Macintosh memory manager has encountered a rare but potentially dangerous error. Quit the application and restart your Macintosh as soon as possible.
-102:No data of the requested type. The information on the clipboard is not compatible with this program. Try again.
-193:Resource file not found. A needed file seems to be missing or can’t be found. Double check your user’s manual for proper installation instructions.
-192;-26:Resource or driver not found. A vital part of the program did not copy correctly and could not be found. Re-install directly from your master disk and try again. If the missing part belongs to the System re-install your System file instead.
-4099:Write request too large. The printer’s memory capacity has been exceeded. Try reducing the size of any large paintings and try again.
-4100;-4097:The communication with the printer has terminated. Check all connections to the printer.
-4101:Printer not found or closed. Check all connections to the printer, re-select the printer using the Chooser desk accessory. If this fails try restarting the printer.
-47;-49:File busy. This file is currently being used by someone else on the network. Otherwise it has been left open as a result of a System Error (if this is the case restart your computer as soon as possible).
-44;-45;-46:File locked. You can't write to a file that has been locked using the Finder's Get Info option, or to one that belongs to a locked disk, volume or folder.
-39:Logical end-of-file reached during a read operation. Something went wrong the last time this document was saved or the disk is defective (possibly wear).
-36:Disk I/O error. Usually this error indicates some kind of hardware problem, either bad disk media (wear) or a defective disk drive.
-33;-34:Disk or disk directory full! Try saving your document to a different disk with more space available. Remember: If you close the document now without saving your work all changes will be permanently lost!
-108:You are out of memory! Try working with a smaller document, close all unnecessary open desk accessories or windows, reduce your disk cache (Control Panel), disable unnecessary INITs and print spoolers, or get more memory.
